N2XCH Dca

header edlersystems cable2 min v4
Halogenfreie Sicherheitskabel
N2XCH Dca

Als halogenfreies Sicherheitskabel mit verbessertem Verhalten im Brandfall zum Schutz von Personen und Sachwerten zur festen oder flexiblen Verlegung in trockenen und feuchten Räumen. Sie sind auch für die Verlegung im Freien und in Erde bei einer Verlegung in Rohren zugelassen. Der konzentrische Leiter mit einer Querleitwendel aus Kupfer darf als PE-PEN-Leiter oder als Schirm verwendet werden.

Datenblatt (N2XCH Dca) herunterladen
Aderanzahl x 
Nennquerschnitt
Leiter Ø Wandstärke 
Isolation
Aussen Ø Gewicht Leiterwiderstand
bei 20°C
Strombelastbarkeit
bei 30°C in Luft
Cu Zahl Zentrallager Werkslager
mm² ca. mm ca. mm ca. mm ca. kg/km ca. Ω/km A kg/km O O
2 x 1,5 RE/1,5 1,4 0,7 14,0 250,0 12,1 24,0 54,0
2 x 2,5 RE/2,5 1,8 0,7 15,0 280,0 7,4 32,0 83,0
2 x 4 RE/4 2,3 0,7 16,0 320,0 4,6 42,0 128,0
3 x 1,5 RE/1,5 1,4 0,7 12,0 200,0 12,1 24,0 73,0
3 x 2,5 RE/2,5 1,8 0,7 13,0 250,0 7,4 32,0 113,0
3 x 4 RE/4 2,3 0,7 14,0 340,0 4,6 42,0 168,0
3 x 6 RE/6 3,1 0,7 15,0 450,0 3,1 53,0 250,0
3 x 10 RE/10 3,8 0,7 18,0 620,0 1,8 74,0 425,0
3 x 16 RE/16 4,7 0,7 20,0 890,0 1,2 98,0 670,0
3 x 25 RM/16 5,9 0,9 25,0 1.350,0 0,727 133,0 940,0
3 x 35 RM/16 7,1 0,9 27,0 1.650,0 0,524 162,0 1.240,0
3 x 50 SM/25 8,0 1,0 30,0 2.400,0 0,387 197,0 1.795,0
3 x 70 SM/35 9,6 1,1 34,0 2.615,0 0,268 250,0 2.510,0
3 x 95 SM/50 11,4 1,1 38,1 3.636,0 0,193 308,0 3.433,0
3 x 120 SM/70 13,1 1,2 42,5 4.606,0 0,153 359,0 4.413,0
3 x 150 SM/70 14,6 1,4 47,0 5.552,0 0,124 412,0 5.313,0
3 x 185 SM/95 16,5 1,6 50,0 6.680,0 0,0991 475,0 6.649,0
3 x 240 SM/120 18,4 1,7 57,1 8.964,0 0,0754 564,0 8.585,0
4 x 1,5 RE/1,5 1,4 0,7 13,0 230,0 12,1 24,0 88,0
4 x 2,5 RE/2,5 1,8 0,7 14,0 290,0 7,4 32,0 138,0
4 x 4 RE/4 2,3 0,7 15,0 400,0 4,6 42,0 208,0
4 x 6 RE/6 3,1 0,7 16,0 500,0 3,1 53,0 309,0
4 x 10 RE/10 3,8 0,7 19,0 750,0 1,8 74,0 525,0
4 x 16 RE/16 4,7 0,7 21,0 1.050,0 1,2 98,0 829,0
4 x 16 RM/16 4,7 0,7 21,0 1.050,0 1,2 98,0 829,0
4 x 25 RM/16 5,9 0,9 27,0 1.600,0 0,727 133,0 1.190,0
4 x 35 RM/16 7,1 0,9 29,0 2.000,0 0,524 162,0 1.590,0
4 x 50 SM/25 8,0 1,0 31,0 2.450,0 0,387 197,0 2.295,0
4 x 70 SM/35 9,6 1,1 36,0 3.450,0 0,268 250,0 3.210,0
4 x 95 SM/50 11,4 1,1 41,0 4.550,0 0,193 308,0 4.383,0
4 x 120 SM/70 13,1 1,2 45,0 5.900,0 0,153 359,0 5.613,0
4 x 150 SM/70 14,6 1,4 49,0 7.050,0 0,124 412,0 6.813,0
4 x 185 SM/95 16,5 1,6 54,0 8.750,0 0,0991 475,0 8.499,0
4 x 240 SM/120 18,4 1,7 60,0 11.200,0 0,0754 564,0 10.985,0
7 x 1,5 RE/2,5 1,4 0,7 14,0 320,0 12,1 24,0 139,0
7 x 2,5 RE/2,5 1,8 0,7 15,0 400,0 7,4 32,0 208,0
7 x 4 RE/4 2,3 0,7 19,0 650,0 4,6 42,0 330,0
12 x 1,5 RE/2,5 1,4 0,7 18,4 450,0 12,1 24,0 214,0
12 x 2,5 RE/4 1,8 0,7 19,2 610,0 7,4 32,0 348,0
24 x 1,5 RE/6 1,4 0,7 23,2 750,0 12,1 24,0 430,0
24 x 2,5 RE/10 1,8 0,7 26,1 1.100,0 7,4 32,0 725,0
30 x 1,5 RE/6 1,4 0,7 24,3 930,0 12,1 24,0 519,0
30 x 2,5 RE/10 1,8 0,7 28,0 1.290,0 7,4 32,0 875,0

DIN VDE 0276-604/HD 604 S1
ab 7 Adern nach DIN VDE 0276-627/HD 627 S1

  • Cu-Leiter, blank, eindrähtig (RE) gemäß DIN VDE 0295 Kl.1,
    IEC 60228 cl.1, oder mehrdrähtig (RM/SM)
    nach DIN VDE 0295 Kl.2, IEC 60228 cl.2
  • VPE - Aderisolation 2XI1
  • Aderkennzeichnung gemäß HD 308 S2
    ab 7 adriger Ausführung schwarz mit Ziffern
  • Adern in Lagen verseilt
  • Gemeinsame Aderumhüllung, darüber Füllmischung
    oder Bandbewicklung
  • Konzentrischer Leiter, Kupferrunddrähte zwischen
    Aderumhüllung und Außenmantel, Kupferband
    als Querleitwendel über den Kupferdrähten
  • Aussenmantel aus Thermoplastischer Polyolefin
    Mischung HM4
  • Mantelfarbe schwarz 
Nennspannung U₀/U: 0,6/1 kV
Prüfspannung: 4000 V
Temperaturbereich
Bei Verlegung: max. -5°C
Betriebstemperatur: -30°C bis +90°C
Leiterbetriebstemp.: max. +90°C
Kurzschlusstemperatur: max. +250°C/5 sec.
Mindestbiegeradius: 12 x DA
CPR-Leistungsklasse: Dca
Korrosivität von Brandgasen: EN 60754-2
IEC 60754-2
Minimale Rauchentwicklung: EN 61034 1+2
IEC 61034-1+2