This cable fulfils the highest demands in the drag chain sector and when used as a control cable on moving machine parts with extremely high bending stresses. The cut-resistant and low-adhesion PUR outer sheath guarantees a long service life. The cable is halogen-free, flame-retardant and resistant to most chemicals found in industrial environments. The tinned copper braiding protects against electrical interference.
|
Number of conductors x Nominal cross-section |
Conductor structure | Outer Ø | Weight |
Conductor resistance at 20°C |
Cu count | Central warehouse | Central warehouse | Factory warehouse | Factory warehouse |
|---|---|---|---|---|---|---|---|---|---|
| mm² | approx. mm | approx. mm | approx. kg/km | ca. Ω/km | kg/km | G | x | G | x |
| 2 x 0,5 | 28 x 0,16 | 7,5 | 90,0 | 39,0 | 36,0 | ||||
| 3 G 0,5 | 28 x 0,16 | 7,8 | 104,0 | 39,0 | 49,0 | ||||
| 4 G 0,5 | 28 x 0,16 | 8,2 | 123,0 | 39,0 | 60,0 | ||||
| 5 G 0,5 | 28 x 0,16 | 9,9 | 131,0 | 39,0 | 72,0 | ||||
| 7 G 0,5 | 28 x 0,16 | 10,0 | 172,0 | 39,0 | 89,0 | ||||
| 12 G 0,5 | 28 x 0,16 | 12,5 | 250,0 | 39,0 | 148,0 | ||||
| 18 G 0,5 | 28 x 0,16 | 14,5 | 321,0 | 39,0 | 214,0 | ||||
| 25 G 0,5 | 28 x 0,16 | 16,8 | 445,0 | 39,0 | 279,0 | ||||
| 2 x 0,75 | 42 x 0,16 | 8,3 | 106,0 | 26,0 | 43,0 | ||||
| 3 G 0,75 | 42 x 0,16 | 8,5 | 120,0 | 26,0 | 57,0 | ||||
| 4 G 0,75 | 42 x 0,16 | 9,5 | 150,0 | 26,0 | 70,0 | ||||
| 5 G 0,75 | 42 x 0,16 | 10,8 | 158,0 | 26,0 | 82,0 | ||||
| 7 G 0,75 | 42 x 0,16 | 11,5 | 205,0 | 26,0 | 113,0 | ||||
| 12 G 0,75 | 42 x 0,16 | 14,0 | 304,0 | 26,0 | 192,0 | ||||
| 18 G 0,75 | 42 x 0,16 | 17,3 | 418,0 | 26,0 | 268,0 | ||||
| 25 G 0,75 | 42 x 0,16 | 18,7 | 578,0 | 26,0 | 331,0 | ||||
| 2 x 1 | 56 x 0,16 | 10,0 | 116,0 | 19,5 | 52,0 | ||||
| 3 G 1 | 56 x 0,16 | 10,2 | 136,0 | 19,5 | 78,0 | ||||
| 4 G 1 | 56 x 0,16 | 11,0 | 178,0 | 19,5 | 89,0 | ||||
| 5 G 1 | 56 x 0,16 | 11,8 | 188,0 | 19,5 | 106,0 | ||||
| 7 G 1 | 56 x 0,16 | 12,7 | 235,0 | 19,5 | 132,0 | ||||
| 12 G 1 | 56 x 0,16 | 15,5 | 35,0 | 19,5 | 206,0 | ||||
| 18 G 1 | 56 x 0,16 | 18,0 | 500,0 | 19,5 | 316,0 | ||||
| 25 G 1 | 56 x 0,16 | 21,0 | 678,0 | 19,5 | 428,0 | ||||
| 2 x 1,5 | 84 x 0,16 | 10,5 | 141,0 | 13,3 | 66,0 | ||||
| 3 G 1,5 | 84 x 0,16 | 10,8 | 164,0 | 13,3 | 99,0 | ||||
| 4 G 1,5 | 84 x 0,16 | 11,5 | 220,0 | 13,3 | 121,0 | ||||
| 5 G 1,5 | 84 x 0,16 | 12,5 | 233,0 | 13,3 | 135,0 | ||||
| 7 G 1,5 | 84 x 0,16 | 13,2 | 323,0 | 13,3 | 227,0 | ||||
| 12 G 1,5 | 84 x 0,16 | 16,2 | 481,0 | 13,3 | 322,0 | ||||
| 18 G 1,5 | 84 x 0,16 | 20,3 | 672,0 | 13,3 | 428,0 | ||||
| 25 G 1,5 | 84 x 0,16 | 23,1 | 927,0 | 13,3 | 568,0 | ||||
| 2 x 2,5 | 140 x 0,16 | 11,8 | 185,0 | 8,0 | 92,0 | ||||
| 3 G 2,5 | 140 x 0,16 | 13,0 | 278,0 | 8,0 | 154,0 | ||||
| 4 G 2,5 | 140 x 0,16 | 14,0 | 370,0 | 8,0 | 170,0 | ||||
| 5 G 2,5 | 140 x 0,16 | 15,1 | 412,0 | 8,0 | 208,0 | ||||
| 7 G 2,5 | 140 x 0,16 | 16,2 | 470,0 | 8,0 | 300,0 | ||||
| 12 G 2,5 | 140 x 0,16 | 21,0 | 738,0 | 8,0 | 537,0 | ||||
| 4 G 4 | 224 x 0,16 | 17,3 | 460,0 | 5,0 | 248,0 | ||||
| 4 G 6 | 192 x 0,21 | 21,0 | 700,0 | 3,3 | 343,0 |
based on DIN VDE 0285-525-2-51
Special properties:
| Nominal voltage U₀/U: | 300/500 V |
| Testing voltage: | 2000 V |
| Insulating resistance: | ≥ 20MOhm x km |
| Temperature range: | |
| When laying: | max. -5°C |
| Operating temperature: | -30°C to +70°C |
| Conductor operating temperature: | max. +70°C |
| Short-circuit temperature: | max. +150°C/5 sec. |
| Minimum bending radius: | |
| When laying: | 10 x DA |
| Fixed installation: | 5 x DA |
| Fire behaviour: | EN 60332-1-2 |
| IEC 60332-1 | |
| Halogen-free: | EN 60754-1 |
| IEC 60754-1 | |
| Oil resistance: | DIN VDE 0473-811-404 |
| EN 60811-404 |
