Cat 7 S/FTP - PiMF 1000 Mhz schwarz

header edlersystems cable2 min v4
Back
Cat 7 S/FTP - PiMF 1000 Mhz schwarz
Datenübertragungsleitungen
Cat 7 S/FTP - PiMF 1000 Mhz schwarz

Data cable for transmitting analogue and digital signals in the frequency range up to 1000 MHz. It is designed for cabling in the primary (campus), secondary (riser) and tertiary (horizontal) areas. For use in LANs such as IEEE 802.3; 10Base-T, 100Base-T; 1000Base-T; FDDI, 10GBase-T, broadband video ISDN, ATM, complies with the requirements of EN 50288-4-1; IEC 61156-5; EN 50173-1, ISO/IEC 11801. The PE sheath enables direct burial and outdoor installation. When laying in cable ducts and indoors, it must be taken into account that the PE sheath is halogen-free, but not flame-retardant.

Download datasheet (Category 7 PE SW 1000)
Add to bookmarks
Sheath thickness Outer Ø Weight Cu count Dimensions Central warehouse Factory warehouse
approx. mm approx. mm approx. kg/km kg/km
0,6 8,0 73,0 44,0 4 x 2 x AWG 23/1

Cat 7 S/FTP - PiMF

  • Bare copper wire, solid AWG 23/1
  • PE - core insulation
  • Core colours: white-blue, white-orange, white-green, white-brown
  • Cores twisted into pairs
  • Pairs individually shielded with
    individually shielded with aluminium foil
  • Shielding braid made of tinned copper wires
  • PE-outer sheath
  • Sheath colour black
Operating capacity: nom. 56 nF/km
Testing voltage: 700 V-AC
Insulating resistance: ≥ 5 GOhm x km
Loop resistance: ≤ 14,0 Ohm/100 m
Capacitive coupling: ≤ 150 pF/100 m
Characteristic impedance:
1-100 MHz: 100 ± 15 Ohm
100-250 MHz: 100 ± 22 Ohm
250-600 MHz: 100 ± 25 Ohm
Maximum tensile force: 110N
Temperature range:
When laying: max. 0°C
Operating temperature: -20°C to +60°C
Minimum bending radius:
under tensile load: 8 x DA
without tensile load: 4 x DA
CPR performance class: Fca