For the transmission of digital and analogue signals up to 16 Mbit/s in EDP system units, ISDN private branch exchanges, in production data acquisition, industrial electronics and in bus technology. For laying in dry and damp rooms on and under plaster. These cables with (St) shielding are ideally suited for interference-free data and signal transmission for measurement and control technology.
|
Number of conductors x Nominal cross-section |
Insulation thickness | Outer Ø | Weight | Loop conductor resistance | Cu count | Central warehouse | Factory warehouse |
|---|---|---|---|---|---|---|---|
| mm | approx. mm | approx. mm | approx. kg/km | max. Ω/km | kg/km | ||
| 2 x 2 x 0,6 | 1,0 | 6,1 | 36,0 | 130,0 | 15,0 | ||
| 4 x 2 x 0,6 | 1,0 | 7,5 | 59,0 | 130,0 | 26,0 | ||
| 6 x 2 x 0,6 | 1,0 | 7,7 | 73,0 | 130,0 | 39,0 | ||
| 10 x 2 x 0,6 | 1,0 | 8,9 | 104,0 | 130,0 | 61,0 | ||
| 20 x 2 x 0,6 | 1,0 | 12,7 | 188,0 | 130,0 | 121,0 | ||
| 30 x 2 x 0,6 | 1,2 | 14,0 | 270,0 | 130,0 | 175,0 | ||
| 40 x 2 x 0,6 | 1,4 | 16,0 | 370,0 | 130,0 | 239,0 | ||
| 50 x 2 x 0,6 | 1,4 | 17,5 | 415,0 | 130,0 | 298,0 | ||
| 80 x 2 x 0,6 | 1,6 | 24,4 | 678,0 | 130,0 | 474,0 |
based on DIN VDE 0815 and 0816
| Operating voltage U: | max. 300 V |
| Testing voltage (50 Hz): | |
| Core/Core: | 500 V |
| Core/Shield: | 2000 V |
| Insulating resistance: | 5 GOhm x km |
| Operating capacity (at 800 Hz): | max. 52 nF/km |
| Characteristic impedance (at 4-16 MHz) : | 100 Ohm ± 15% |
| Capacitive coupling (at 800 Hz): | |
| K1 (max.): | 800 pF/300m |
| K9-K12 (max.): | 300 pF/300m |
| Crosstalk attenuation (4 MHz to 16 MHz): | |
| for 2 pairs: | min. 40 dB |
| from 4 pairs: | min. 25 dB |
| Temperature range: | |
| When laying: | max. -5°C |
| Operating temperature: | -30°C to +70°C |
| Minimum bending radius: | 10 x DA |
| CPR performance class: | Eca |
