Profibus SK - Schnellkontakt

Busleitungen

The cable can be used as a connecting cable in general mechanical engineering. It is used as a connecting cable between bus segments. The advantage of bus technology lies in the cost-effective wiring of machines and systems. Only the component for which the information is intended reacts to the signal and processes it. The shielding ensures use in EMC-critical environments. Suitable for fixed installation in dry rooms.

Download datasheet (Profibus Standard SK - Quick contact)

Add to bookmarks

Number of conductors x Nominal cross-section	Outer Ø	Weight	Cu count	Central warehouse	Factory warehouse
mm²	approx. mm	approx. kg/km	kg/km
02YY(St)CY 1 x 2 x 0,64	8,0	75,0	27,0

DIN VDE 19245 T3 and EN 50170

Bare copper wire, solid, Ø 0,64 mm
Zell-PE - core insulation
Core colours red and green
Cores with optimum lay lengths stranded in layers
PVC intermediate sheath (SK)
Overall shield made of aluminium-laminated foil and braiding
of tinned copper wires
PVC - outer sheath
Sheath colour violet (RAL 4001)

Characteristic impedance:	±150 Ohm 10%
Conductor resistance:	max. 57,1 Ohm/km
Loop resistance:	max. 110 Ohm/km
Insulating resistance:	≥ 1 GOhm x km
Operating capacity (at 1kHz):	max. 28 nF/km
Attenuation for:
9,6 kHz:	max. 2,5 dB/km
38,4 kHz:	max. 4,0 dB/km
4,0 MHz:	max. 22 dB/km
16 MHz:	max. 42 dB/km
Temperature range:
When laying:	max. -5°C
Operating temperature:	-30°C to +60°C
Minimum bending radius:	150 mm
CPR performance class:	Fca