Profibus für Erdverlegung

Busleitungen

The cable can be used as a connecting cable in general mechanical engineering. It is used as a connecting cable between bus segments. The advantage of bus technology lies in the cost-effective wiring of machines and systems. Only the component for which the information is intended reacts to the signal and processes it. The shielding ensures use in EMC-critical environments. This cable is designed for installation in the ground and for fixed installation in harsh industrial environments.

Download datasheet (Profibus for underground installation)

Add to bookmarks

Number of conductors x Nominal cross-section	Outer Ø	Weight	Cu count	Central warehouse	Factory warehouse
mm	approx. mm	approx. kg/km	kg/km
02Y(St)CY2Y 1 x 2 x 0,64	10,2	85,0	27,0

DIN VDE 19245 T3 and EN 50170

Bare copper wire, solid, Ø 0,64 mm
Zell-PE - core insulation
Core colours red and green
Cores stranded in layers with optimum lay lengths
Overall shield made of aluminium-laminated foil and braiding
of tinned copper wires
PVC - inner jacket
PE - outer jacket, UV resistant
Sheath colour black

Characteristic impedance:	150 Ohm ± 10%
Conductor resistance	max. 57,1 Ohm/km
Loop resistance:	max. 110 Ohm/km
Insulating resistance:	≥ 1 GOhm x km
Operating capacity (at 1kHz):	max. 28,5 nF/km
Attenuation for:
9,6 kHz:	max.3,0 dB/km
38,4 kHz:	max. 5,0 dB/km
4,0 MHz:	max. 5,0 dB/km
16 MHz:	max. 45 dB/km
Temperature range:
When laying:	max. -5°C
Operating temperature:	-40°C to +60°C
Minimum bending radius:	150 mm
CPR performance class:	Fca