J-H(St)H EIB | Easycables

Busleitungen

J-H(St)H EIB

For transmitting signals in building systems technology for controlling lighting, heating, air conditioning, ventilation and time recording systems. It can also be used for the transmission of measured values as an I&C cable in power installations or in process data processing. Suitable for installation on and under plaster, in pipes, in dry, damp and wet rooms and outdoors if protected from direct sunlight; not approved for power installations and underground installation.

Download datasheet (J-H(ST)H EIB)

Add to bookmarks

Number of conductors x Nominal cross-section	Sheath color	Outer Ø	Weight	Loop conductor resistance	Cu count	Central warehouse	Factory warehouse
mm		approx. mm	approx. kg/km	max. Ω/km	kg/km
2 x 2 x 0,8		6,3	55,0	73,2	21,0

based on EIBA Specification

Bare copper wire, solid Ø 0,8 mm
Core insulation halogen-free polymer mixture
Cores and quad designation according to DIN VDE 0815
Cores twisted to star quad
Shield made of plastic-laminated aluminium foil with continuity wire
Outer sheath made of halogen-free polymer mixture

Operating voltage U:	max. 300 V
Testing voltage (50 Hz):
Core/Shield:	4000 V
Insulating resistance:	100 MOhm x km
Operating capacity (at 800 Hz):	max. 100nF/km
Capacitive coupling (at 800 Hz):
K1:	max. 200 pF/100m
Temperature range:
When laying:	max. -5°C
Operating temperature:	-30°C to +70°C
Minimum bending radius:	7,5 x DA
CPR performance class:	Eca
Corrosiveness of fire gases:	EN 60754-2
	IEC 60754-2
Minimal smoke development:	EN 61034 1+2
	IEC 61034-1+2